Solar Fuse (DC) with Indicator Light

Description

1. Product Introduction

YTPV-32 series of 10X38mm 1000VDC fuse+holder is designed to provide over-current protection for solar arrays. The use of a fuse can protect your solar array from unnecessary damage from an over-current event.

2. Product Specifications

3. Product Feature

1. Fault light cells break points at the same time, does not affect other normal work of light from the stack.

2. is high silica quartz sand( 98% or more )

3. “gPV” means the full range DC breaking protection on solar photovoltaic power generation system.

4. CE certificated

4. Product Details

1. Retardant shell, The product is made of flame retardant material fireproof, heat resistant and oxidation

2. Work indicator, With indicator light device better judgment disconnection fault

3. Quartz sand medium, The fuse tube is filled with high-purity quartz sand as the arc extinguishing medium, which has high thermal conductivity and insulation, and enhances the arc extinguishing ability of the fuse

5. FAQ

Q: Are DC and AC fuses the same?

A: DC fuse system is continuous, AC system goes to zero volts each cycle. This is important factor because when you blow a fuse in DC system, A plasma can form and continue conducting current, AC will to, but when the cycle crosses zero volts, The plasma dies and the circuit is open.

Q: What fuse do I need for a 12v battery?

A: You can use a 32A fuse for each battery. Use real thick wires! and as short as possible. One voltage drop over a wire uses 83 watt, that will fry your wire for sure.

Q: Could you offer Form A ,C/O and From E ?

A: It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.

Q: Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings, but it has MOQ or you need to pay the extra fee.

Q: Can we print our logo/website/company name on products?

A: Yes, please advise the size and Pantone Code of the logo.